MultiCam Celero 7 Couldn’t find Home. Stuck at this screen:
HOMING ERROR
[ Dual X homing ]
Homing limit(s) not
Found within the
Specified threshold
I called MultiCam a couple of times to find out how to move the “stuck” head from the corner so I could remove the gantry bolts. Turns out there is just such a feature for this called “Emergency Jog”. To activate:
Press SHIFT, then Z Up and finally hold Z Down for 10 seconds. Press the number 3 to jog and very solely move it left with 4.
If carefully loosening 12 bolts and homing the machine back into place is fixing things, then this was the most expensive machine I’ve ever “fixed”! : )
Re🤬eD
🥓