Whether the motorcycle is stuck in the dust or not, the performance of the bike should be tiptop, but we all want it.
#Motorcycle_serviceing_is_a_important_ role.
"Motorcycle servicing" If you service on time as well as take care, you do not have to touch the engine for a long time. It is the sum of certain tasks.
Wherever you have your motorcycle serviced, make sure to do the following 22 tasks.
#First_work: Wash and clean the motorcycle. Dry well with compressed air.
Second_Works: Spark plug, clean the plug space, fix the gap of the plug (0.8 - 0.9 mm).
Third_work: Check if the valve / tape clearance is OK, if not fix it. (It would not be good to guess by hand, if you want to be perfect, do it with a filler yard.)
#Fourth_work: Fix the idle RPM. Keep within 1000 rpm
Fifth_work: see if there are any leaks or cracks in the fuel line. Check.
Sixth_work: Clean the air filter according to the instructions.
#Seventh_work: Change engine oil, oil filter.
Eighth_work: Check front and rear brakes. Adjust.
#Ninth_work: Check the clutch lever free play. Adjust. (Usually 10-15 mm.)
Tenth_work: check the condition of the wheel, see if the glass, small pins, nails are hidden somewhere. Clean up.
Change the wheel if you touch the expired marking.
11th_work: Check if the bearings on both wheels are loose or damaged.
12th_work: The handle bar rotates smoothly from right to left, adjust if you feel tight looseness somewhere.
13th_work: front wheel fork (suspension), rear wheel shock (suspension) is working properly, check if oil is leaking.
14th_work: If the drive chain is too loose, adjust if it is too tight, align the chain according to the markings on both sides of the wheel. Apply to the indicated lubricant chain.
15th_work: Check all the nut bolts, tighten if loose.
16th_work : Check all lamps, electrical switches.
17th_work : Check the air pressure of the wheel, give air if necessary.
18th_work : Measure the carbon dioxide emitted at the idle RPM, adjust. (Not possible without a major service center.)
19th_work: Check all moving places (metal tomato), apply lubricant. Side stand, center stand, two ends of spring.
20th_work: Check the brake switch on both wheels.
21st_work: Check clutch cable, throttle cable, apply lubricant.
22nd_work: When all the above is done, give a test drive. Then clean and polish. I hope your motorcycle will give excellent performance.
Side_note:
After servicing, wash the front disc with water.
Make sure the bike's paperwork is in order.
If a mechanic hires someone else while you work,
Do not work in that store.