H_{^{ello My dear friends, I hope everyone is well? Alhamdulillah! I am also well with your prayers and love।}}

Today I have drawn a machine diagram from my practical drawing area to talk about and the method of drawing.I am not able to draw professionally, but it can be called one of my daily jobs.Regularly I have to do these so today I am going ahead with a machine and referring to the machine diagram.It can be said that this is an outline of my complete practical classes.The machine I drew today is called “Brushing Machine”.I will try to highlight the requirements along with the operation of this machine.
First let's talk about the method of drawing this machine,

• Pencil
• Ledger
• Rubber
• pencil cutter
• Ruler
• Cut compasses etc

Draw two small circles on either side and draw another circle between the circles.Small circle Two rollers one feed roller and the other delivery which contains cloth.A big circle should be drawn in the middle but the bottom part will be blank.This large circle is called the cylinder in which the work is mainly done.

In this step I take a circle within the big circle but then I have to draw small circles every now and then.These are basically clothespins with the help of which the cloth is soft after brushing and has to be lifted a lot i.e. leaving the inner surface like cotton.I could not take a picture of this step, I will try to do so from the next time, inshallah.At the bottom there are two brushes with strong pins as seen here in the drawing of the sun.

At this stage the drawing process of the machine will be completely finished and I will have to mark the various things and write their names.This was today's drawing system.But as much as I tried, it was not possible. In the coming days, I will try to write beautifully with full practice and ideas.

• Removes lumpy naps, slabs, etc. on the fabric surface.
• Used to make sweaters that have a cotton lining.
• This machine is used for finishing the cloth.

Caution:

• Its pins are sharp so should be positioned with care.
• Do not touch the machine while it is moving, it will cause serious accidents.
• All observation should be done from a safe distance.